Direct Boot & Embroidery Ltd.

My Basket:

0 item(s) - £0.00
You have no items in your shopping cart.

Order hotline or call

LOGO
EMBROID AND PRINT
New Factory Now Open

01992 717 000

Safety Footwear Standards Explained EN345 / EN ISO 20345:2007 / EN ISO 20345:2011

What you wear on your feet really matters. Getting the right footwear will make life safer and easier. Employers are legally responsible for providing the correct footwear. Protect now.

The safety footwear standard is refered as EN345, EN ISO 20345:2004, EN ISO 20345:2007 and EN ISO 20345:2007. All footwear designed before 2004 and still manufactured up to today carries EN ISO 20345:2004. EN ISO 20345:2007 standard for footwear designed or retested after 2007 the new standard is the EN ISO 20345:20011 and un like the previous standards all foot wear manufactured after the 31st of July 2013 must meet that standard, now that doesn't mean that footwear made before that date is now of no use what it means is that footwear produced after that date will meet the new tougher standard.

The EN ISO 20345:2007 standard sets out minimum requirements that safety footwear must be successfully tested against.

The EN ISO 20345:2011 standard sets out new tougher minimum requirements that safety footwear must be successfully tested against.

The standard specifies all safety footwear must have toe protection. In addition to different protective features footwear represented by a comination of letters.

 

All Safety Footwear in this standard is at least SB which means it has toe protection against a 200 Joule impact
RatingFeatures
SB  
SB-P P
S1 A + FO + E
S1-P A + FO + E + P
S2 A + FO + E + WRU
S3 A + FO + E + WRU + P
S4 A + FO + E + Waterproof
S5 A + FO + E + P + Waterproof
 
KeyDescription
A Antistatic footwear
C Cut resistance of upper
CI Cold insulation of sole complex
E Energy absorption of heel region
FO Resistance to fuel oil of outsole
HI Heat insulation of sole complex
HRO Resistance to hot contact of outsole
M Metatarsel Protection
P Penetration resistance
WR Water resistant
WRU Water resistant upper

Toe protection (SB)

Your toes are a very vunerable part of your body, especially in a work place. Toe protection must withstand a 200 joule impact. Joule is the unit of energy and this standard is purposefully specific. Something heavy falling from a low height could have a lot less energy than something lighter from a much higher height. As well as impacts the toe area must withstand a resting mass of well over 1000kg.

Most people have heard of steel toe cap boots but the protection doesn't have to be steel. Infact there are advantages to alternatives. Non-metallic protection can be equally as strong but lighter.

Antistatic protection (A)

Clothing, seating materials, and climate factors can cause a build up a static charge of electricity in the body. Some materials in footwear can over insulate the body causing the charge to be held. When you then touch something the charge can rush from your body quickly causing a spark and a small uncomfortable shock. Antistatic footwear will significantly reduce this effect but does not offer full protection for exposure to electronics and explosives work. You will need Electro-Static Protection (ESD) for this.

Midsole penetration protection (P) - SB-P, S1-P, S3, S5

Sharp objects where we walk and stand are significant risk not only in the workplace but also outdoors and at home. Midsole protection will guard against nails and other objects. To meet this standard the footware must be able to resist a penetration force of 1100N. Midsole protection is provided in one of thee methods: a stainless steel insert in the sole, aluminium insert in the sole, or by Kevlar insole. The Aluminium and Kevlar solutions are the most flexible and lightest and cover the greatest area of the foot. Kevlar insoles also offer much higher thermal insulation.

Energy Absorption (E)

Energy Absorption in the heel region

Water Resistant Upper (WRU)

Water resistant upper, not used on all rubber or polymeric footware.

Heat Resistant (HRO)

Heat resistant Outsole: To resist 300°C for 60 seconds

Insulation against Cold (CI)

Insulation against cold: tested for 30 minutes at 1 -20°C

Insulation against heat (HI)

Insulation against heat: tested for 30 minutes at 150°C

Electro-Static Discharge (ESD)

ESD footware is desined for the electronics and explosives indsustry and has to meet ESD CEI EN61340-5-1 standard.

Non-metallic footwear

Safety footwear containing no metal parts are ideal for workplaces with metal detectors like airports eliminating the hassle of removing them.

Safety Ratings Explained

SB

The rating SB indicates that the safety footwear has a 200 joule toe protection, it can have aditional features but it is the most basic of safety footware.

SB-P

SB-P has the same features as the SB rating with the adition of the midsole penertration protection this can be a stainles steel insert in the sole, aluminium insert in the sole or by kevlar insole.

S1

S1 in adition to 200joule toe cap, is classed as antistatic footwear the sole is also resistant to fuel oil and has energy absorptoin in the heel area.

S1-P

S1-P has the same features as the S1 rating with the adition of the midsole penertration protection this can be a stainles steel insert in the sole, aluminium insert in the sole or by kevlar insole.

S2

S2 in adition to 200joule toe cap, is classed as antistatic footwear the sole is also resistant to fuel oil and has energy absorption in the heel area it also has a water resistant upper

S3

S3 has the same features as the S2 rating with the adition of the midsole penertration protection this can be a stainless steel insert in the sole, aluminium insert in the sole or by kevlar insole.

S2

S4 in adition to 200joule toe cap, is classed as antistatic footwear the sole is also resistant to fuel oil and has energy absorption in the heel area it is waterproof none as leak proof

S5

S5 has the same features as the S4 rating with the adition of the midsole penertration protection this can be a stainles steel insert in the sole, aluminium insert in the sole or by kevlar insole.

All safety footwear can have more features than are listed above but these are the minimum requirements to meet each of the safety ratings, So you cold have a S1 CI or S1 HI. we have listed the main ratings above there are more but these are the most comon

This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x